Issues

• Max Channels reported as 8 on T-LoRa V2.1-1.6 (v1.18.0-81dbae5)

  meshcore-dev/MeshCore#3665 · Filter by author Nibb31 opened on Oct 22, 2026

• [Feature request] New board variant: eink-ra01s-gp02 (nRF52840 + SX1262 + 2.13" e-ink + GP02 GNSS + PCF8563)

  meshcore-dev/MeshCore#3663 · Filter by author lovely-him opened on Oct 22, 2026

• Proposal: binary data to one contact, with a delivery ack (the direct counterpart of GRP_DATA)

  meshcore-dev/MeshCore#3662 · Filter by author cm4ker opened on Oct 22, 2026

• Per Channel Alias + Flood Advert Alias + Per Contact Alias + Zero Hop Advert Alias

  meshcore-dev/MeshCore#3661 · Filter by author just-stuff-tm opened on Oct 22, 2026
  1

• [Feature request] Battery status CLI

  meshcore-dev/MeshCore#3660 · Filter by author berk76 opened on Oct 21, 2026
  1

• Tried to setup wifi and it went into a loop

  meshcore-dev/MeshCore#3658 · Filter by author rimugu opened on Oct 21, 2026

• Make reboot.interval a part of the native firmware

  meshcore-dev/MeshCore#3657 · Filter by author HougeDK opened on Oct 21, 2026

• set tz.offset: accept ±hh:mm, ±hhmm, UTC±hh:mm and UTC±h input?

  meshcore-dev/MeshCore#3656 · Filter by author Confituurke opened on Oct 21, 2026

• Message Retention Fault

  meshcore-dev/MeshCore#3653 · Filter by author P5YB3RN4UT opened on Oct 21, 2026

• Bluetooth keyboard

  meshcore-dev/MeshCore#3652 · Filter by author petrovserg224-hue opened on Oct 21, 2026

• T096 Power Level Higher Than Setting - Illegal Arg/Setting

  meshcore-dev/MeshCore#3650 · Filter by author SamuelHiatt79 opened on Oct 20, 2026
  5

• my ThinkNode M1 video, you can see we habe not all data in the display on top of the display.

  meshcore-dev/MeshCore#3645 · Filter by author HB3YDM opened on Oct 20, 2026

• [Feature request] Ability to add location to repeater in contacts list.

  meshcore-dev/MeshCore#3642 · Filter by author Kent-s opened on Oct 20, 2026
  2

• OLED remains black after update to 1.18 (Heltec v4)

  meshcore-dev/MeshCore#3641 · Filter by author Techtobi83 opened on Oct 20, 2026
  1

• [Feature request] Optional BLE repeater observer transport with bounded queues

  meshcore-dev/MeshCore#3640 · Filter by author throny opened on Oct 20, 2026

• [Feature Request] Embed externally linked images in messages

  meshcore-dev/MeshCore#3636 · Filter by author Mhowser opened on Oct 19, 2026

• firmware 1.18.0 cannot read BME280 sensor

  meshcore-dev/MeshCore#3634 · Filter by author carl-mempool opened on Oct 19, 2026
  2

• Misleading error message when phone is out of Bluetooth range of mesh device

  meshcore-dev/MeshCore#3629 · Filter by author teleop-bench opened on Oct 18, 2026

• [Feature Request] Add an Easily Accessible Power Off Button to the MeshCore Mobile App

  meshcore-dev/MeshCore#3628 · Filter by author cbpolska opened on Oct 18, 2026

• Base Uno repeater (no superio) lacks gps support

  meshcore-dev/MeshCore#3622 · Filter by author mikerocklewitz opened on Oct 17, 2026

• Dynamic packet power

  meshcore-dev/MeshCore#3621 · Filter by author kschalmo opened on Oct 17, 2026

• RAK4631 Companion - Bluetooth Connect Hangs

  meshcore-dev/MeshCore#3619 · Filter by author whitemg-w2fcp opened on Oct 17, 2026
  1

• Feature Request: Hardware screen wake-up and message display on RX (LILYGO T-LoRa V2.1-1.6)

  meshcore-dev/MeshCore#3616 · Filter by author libcoolbook opened on Oct 17, 2026

• Consistency in behaviour between e-ink devices (mostly M1, M5, M8 and TEcho, which have two physical buttons and a backlight)

  meshcore-dev/MeshCore#3612 · Filter by author gknoblauch opened on Oct 17, 2026
  14

  

• Request zero hop advert from repeater (privately or direct)

  meshcore-dev/MeshCore#3611 · Filter by author scotthibbs opened on Oct 17, 2026
  10